LogWorks file

In case you were curious, here is my Innovate LM-1 log file.

It contains 3 sessions.

first session was 160 mains and 170 air corr.

last session was 150 mains and 180 air corrector

(please note: higher the main number the richer it gets, the lower the A/C number the richer it gets. Because the Main flow fuel and A/C flows air)

you will notice when the car is on the straight when you see 5-8secs of steady readings. During shifts and on decel the throttle plate is closed and the car will go lean. This is normal it is also like this in fuel injection engines.

in the first session you will note around 10-10.9 a/f on the straight at full throttle in 4th gear.

then by the 3rd session it went up to 11.9-12ish at full throttle in 4th gear.

TO VIEW LOG FILES,

DOWNLOAD AND INSTALL LOGWORKS,
bottom of the page under legacy software... logworks 1.1
http://www.innovatemotorsports.com/support.php

download my log file
- open logworks
-open file - browse to my file

I'm only using input 1, I do not have the rev counter feature.

make sure the software is set to view in AFR not lambda.

Under "session" choose what session you want to view.

use playback control to splay, pause, stop etc....

have fun!